The M200 is a family of specialized signal conditioner modules which is used with the HSM/HSL packages but can also be used with any application that requires conditioning or conversion of signals prior to processing by the M4500 or any PLC or controller.

All M200 modules are packaged in a standard 3" X 3" X 1" DIN rail mountable package complete with removable field wiring connectors. Seven different modules are available:

M230: Frequency-to-Voltage Converter
M231: Frequency-to-Voltage Converter with Offset
M240: Resolver Isolation Module
M245: Quadrature Encoder Signal Converter
M263: Opto-Isolator Module (three-section)
M273: High Speed Solenoid Driver

For pricing and availability, contact us.

• Converts 0-1KHZ input frequency to proportional analog output
• 0-10 volt or 0-20 milliamp analog output
• Adjustable output full scale range
• Optically isolated 10-30 VDC differential input
• Powered from +24VDC
  

• Converts 0-1KHZ input frequency to proportional analog output
• 0-10 volt or 0-20 milliamp analog output
• Adjustable output full scale range
• Adjustable offset (added to output) with threshold adjustment
• Optically isolated 10-30 VDC differential input
• Powered from +24VDC
  

• Used to increase noise immunity of resolvers by providing electrical isolation between the resolver and the programmable limit switch (PLS) it interfaces with
• Transformers isolate the reference signal (R1,R2) and both stator signals (S1,S3 and S2,S4) of resolver format signals
• Provides 1500 VRMS isolation between PLS and resolver
• Dip switch selectable transformation ratio of 1:1 or 1:2 on reference signal and ratio of 1:1 and 2:1 on stator signals allows increased flexibility in matching different resolvers to different PLSs and increases noise immunity
  

• Converts quadrature encoder signals to "forward" / "reverse" signals for use by standard PLC input interrupts
• Optically isolated 5-10 VDC and 10-30 VDC differential inputs for quadrature phase "A" and "B"
• 10-30 VDC "forward" and "reverse" sourcing outputs with short circuit protection
• Powered from 10-15VDC or 15-30VDC
  

• Three independent optical isolators (1500 VRMS)
• 10-30 VDC differential inputs
• 10-30 VDC differential outputs
• 1.5K ohm Input impedance per input
• 50 milliamp current drive capability per output
• LED status indication for each section
• Can be used to: convert different DC voltage levels, convert sinking-to-sourcing or sourcing-to-sinking, convert 120VAC to 10-30VDC.
  

• High speed solenoid driver that improves solenoid response time, repeatability, and reliability
• Provides 39 volt DC turn "on" pulse for faster solenoid "on" response and 13.5 volt holding voltage for faster solenoid "off" response
• Adjustable turn "on" pulse (5 to 25 milliseconds)
• Optically isolated 10-30 VDC differential input
• Optimized for 24VDC solenoids
• Rated for 5 Amp inrush and 3 Amp continuous current
• LED status indication of solenoid energized
• Powered from external +24VDC and -15VDC user power supplies